Mixing & Feeding Guide
1. Boil fresh drinking water and cool down to approx. 40°-50° C / 104-122° F.
2. Pour in the amount of this previously boiled water into a clean and sterilized bottle.
3. Using the scoop provided with your box of formula, add the correct number of leveled scoops of powder:
One [1] scoop of formula to every one [1] fl ounce of water
4. Gently swirl the bottle or stir with a folk to minimize air bubbles.
5. Cool to drinking temperature (approximately 98 degrees Fahrenheit or ~ 37 °C).
**Only for ANTI REFLUX: After preparation, let the bottle sit for 7 minutes to allow it to thicken.
Important Feeding Information
* Only use the scoop provided in the pack.
*Do not make feeds weaker or stronger than indicated by adding extra water/scoops, and do not add anything else to milk feeds.
* For hygiene reasons, always freshly prepare feeds and do not prepare in advance. Use made up feeds within 2 hours of preparation. Discard anything leftover at the end of the feed.
* Do not heat feeds in a microwave, hot spots may occur which could cause scalding.
* Introduce a cup or beaker as soon as possible to prevent prolonged/frequent contact of teeth with milk feeds which may increase the risk of tooth decay.
* Use sachet within 3 weeks of opening.